A-11135C AND A-11052D BUSHINGS NOT SERVICED

The new 11135C starter rear end plate bushing and the A-11052D starter brush end plate bushing will not be serviced as separate units, as these new bushings are designed to last the life of the starter motor and there will be few service calls for them. Furthermore, they cannot be properly installed without the use of special equipment.

If you should receive a call for an A-11135C bushing supply an A-11130D starter rear end plate-this part has the bushing installed. Calls for A-11052D can be taken care of by supplying A-11049 starter brush end plate assembly.

When installing an A-16310 or an A-1631 lA or B fender on a Town Car, or on the Murray Town Sedan or Standard three-window Sedan it will be necessary to drill two 9/32’’ holes in the fender apron (see Fig. 735 for location of holes) and use two A-20596 bolts, A-21668 nuts, A-22151 lock washers and A-22166 plain washers to attach the fender apron to the cross sill rear panel. On the Taxi drill a 1/4” hole (see Fig. 735) and use screw A-22686 and washer A-22166.

Scroll to Top
Scroll to Top