Disassembling Clutch

Place clutch on clutch fixture and screw wing nut down until clutch spring tension is relieved. Next screw off the five clutch driven disc stud nuts (See “A” fig 455) then back off wing nut on fixture. Clutch thrust bearing hub and spring can now be lifted off.

((Fig 456))

By lightly dropping the threaded end of the fixture on a bench, the clutch plates and discs can be removed (see fig 456.), with the exception of the rear driven disc which is a tight fit on the drum and usually lasts the life of the car.

Scroll to Top
Scroll to Top