If an occasion should arise where it was necessary to replace a radiator filler flange on a 1930 car, be sure to install it in the correct position. If the filler flange is in- correctly assembled, any radiator ornament that might be mounted, instead of pointing straight ahead, would point to one side.
When installing a filler flange, be sure that the stops at the ends of the cam are in the position shown in Fig. 843. The stop on the left side should be 3/16’’ ahead of a center line drawn parallel with the radiator while the
stop on the right should be 3/16” back of the centerline, as shown in Fig. 843.