Should an owner desire a rear bumper of the cross bar type in preference to the standard fender guards used on the Model A, the changeover can be easily made as the rear bumper arm is designed for both fender guard and cross bar type bumpers.

The cross bars used on the front bumper are used in making the change and are installed as follows:

Take off rear fender guards by removing the four rear fender guard to arm bolts and the two fender guard clamps. (Be sure to replace the four arm bolts as they hold the bumper brace in place.)

Next assemble two front bumper cross bars (A-I7757-B) using the regular center clamps, end bolts, spacers, nuts and washers, and install cross bar assembly on rear bumper arms using the same clamps removed from the fender guards.