To reduce the number of floor mats carried for service, a new floor mat has been released. This mat can be used in replacement of a number of the old style mats as it has markings on top indicating where it may be cut in order to fit the different type bodies. (see Fig. 1186.) …
A-18305-ER spare wheel and tire lock assembly. (For 30 x 4.50 tires.) Replaces A-18305-AR spare wheel and tire lock assembly which has been obsoleted. This part is the same as A-18305–AR except that it does not have the cylinder included. When this assembly is installed, it will be necessary to include an A-46123-E cylinder and …
After present stocks of sportlights are exhausted, the lights and brackets will be furnished separately. Brackets will be supplied only when ordered. Using the correct brackets for sportlight installation is very important. All Model “A” closed cars now have a hole in the corner post for installation of the sportlights. When the correct bracket is …
A longer rear view mirror bracket (AA-17698) has been released to replace the AA-17745-C bracket used on the following truck bodies: 157” platform (185-B), 131 1/2” platform (187-A). Coal body (201-B) when used with closed cab. The new bracket is 14 11/16” long. It will prove more satisfactory on the above body types than the …
Rear view mirror assembly A-17728-R (black finish) and assembly A-17729-R (nickel plated) have been obsoleted and replaced with A-17723-B (black) and. A-17723-A (chrome) respectively. When replacing either one of these old style mirror assemblies with the new design, it will also be necessary to supply A-17724-A or B acorn nut and A-22150-Sl or S7 lock …
To meet any unusual requests for additional leg room in trucks equipped with closed cabs, a special seat back assembly A-84330 has been released to be sold through service. When supplying this new seat back assembly in replacement of the standard A-77005-C assembly, it is necessary to supply two A-84386 seat back attaching plates and …
A new and unusually attractive metal tire cover has recently been released. The new cover consists of a black inner and outer ring with chrome plated moulding strips (see Fig. 1149). The new cover is carried under part A-1395-E. The list price is $7.5O and it is subject to dealer’s regular parts discount. Any all …
In the manufacture of the Victoria coupe, a hole is provided in the corner post of the body for the installation of a sportlight. Providing a hole at this point eliminates drilling through the post, as it is only necessary to drill through the outside metal. To exactly locate the correct point for drilling the …
Special tire covers and spare wheel guard round out attractive line of Model “A” accessories. Fig. 937 illustrates two additional accessories which are now available-a metal tire cover and a spare wheel guard. The new tire cover, which is furnished in addition to the fabric cover (A-1395-B), is of a two-piece design, consisting of an …
The channel inside the left-hand coupe pillar in closed cars is now pierced to permit easy installation of the Sportlight. The only drilling a mechanic now has to do is through the inner and outer shells of the panel. In the future, all Sportlights will be furnished with a new bracket, also a metal template …
No drilling is required to install a Sportlight on a 1930 open car. It is necessary, however, to use a special open car bracket A-18561. Dealers can purchase these brackets from Ford Branches at a price of75 cents each net, or the Branch will supply them in exchange for the closed car bracket included with …
A template or locator for installing Sport- lights on the 1930 Models has been mailed to all dealers. When installing a Sportlight apply the template furnished to the corner post, and it will locate the place to attach the Sportlight outside mounting clamp. This template fits all closed models, and with the Sportlight you have …
©2023 Model A Garage, Inc.
Designed, Powered, and Managed By Shenandoah Business Solutions ⚡
