ONE PIECE BUSHING
To lessen any possibility of lubricant work- ing out through the bolt hole in the rear spring pivot seat AA-5788-D, the pivot seat bushing is now made in one piece instead of two (see Fig. 1131).
Bushing
Installing Bushings
A small line is marked in one end of each of the above bushings. (See Fig. 1025.) When installing always insert the marked end of the bushing into the opening, then press the bushing in place.
PEDAL BUSHINGS LENGTHENED
The length of the A-7508-B pedal bushings have been changed from 15/16 to 1” This increase in length eliminates the lubrication space between the bushings after they are assembled in the pedal. When replacing 15/16” bushings with the 1” long bushings in pedals having lubricator fittings assembled it will be necessary for dealers to drill …
