Distributor
Adjusting Breaker Contacted Points
The gap between the breaker points is set to .015 inch to .018 inch. The gap should occasionally be checked to see that the points are properly adjusted. If the points are burnt or pitted they should be dressed down with an oil stone. Do not user a file. To adjust the contact points proceed …
Ignition Timing
As the spark must occur at the end of the compression stroke, the timing must be checked from that point. To find the compression stroke and time the spark proceed as follows: Fully retard spark lever. Check gap between breaker contact points and if necessary adjust them as previously described. Screw out timing pin located …
Ford Type Electrolock
The ignition switch mounted on the instrument panel at the left of dash light is a combination switch and theft proof lock. This type of lock carries the highest classification of the Underwriter’s Laboratories. When the lock cylinder is “in,” the ignition circuit is broken and the car locked. To unlock the switch, turn the …