Sometimes a mechanic, when working on a car, will accidentally drop a starter screw or a bolt or a nut into the flywheel housing. These can often be removed without dis- mantling the engine by disconnecting the ball end of the front radius rod from the clutch housing and exposing the hole in the bottom …
After installing flywheel housing, always check the rear and the counterbored faces of the housing to see that they are in alignment with the face of the crankshaft flange. An indicator is used for this purpose. If either the inner or counterbored face of the housing is out of alignment with the crankshaft flange more …
©2023 Model A Garage, Inc.
Designed, Powered, and Managed By Shenandoah Business Solutions ⚡
