The width of the tongue or lug on the driving pinion bearing nut retainer has been changed from 5/32” to .240/.245. The new retainer is listed under part number AA-4669-C. The old retainer AA-4669-BR with the 5/32” lug will be held for repairs. To correspond with the change in the retainer, the width of the …
When installing a new pinion and bearing sleeve assembly, for a start replace the same amount of shims between sleeve and axle housing that were removed (see Fig. 829). These shims control the adjustment between ring gear and pinion. After bolting sleeve to housing, check the back lash between ring gear and pinion. The back …
©2023 Model A Garage, Inc.
Designed, Powered, and Managed By Shenandoah Business Solutions ⚡
