New Flexible Front End Support
…arms are bolted to the engine the front support does not have from 1/64 to 3/64 clearance between leather washer and top of flat spring, loosen the four bolts holding…
…arms are bolted to the engine the front support does not have from 1/64 to 3/64 clearance between leather washer and top of flat spring, loosen the four bolts holding…
…supply the AA-5019 front cross member and an A-6030 engine front support. Assembly, nuts, springs, etc., shown in Fig. 1081. The engine front support A-6030 can be installed on a…
We are now using a stronger A-6031 engine front support-spring on all AA trucks. Within the very near future this spring will also be used on cars. In the meantime…
…be easily corrected by removing the auxiliary and the engine front support springs and adding an A-22323 steel washer and two A- 6033-A leather washers as shown in Fig. 762….
…the new engine front support assembly when replacing an old cross member with an AA5020AR. In cases of this kind the customer must not be charged for the front support….
Sometimes the shank or stud of the engine front support will rub against the side of the auxiliary spring and cause a slight squeak. To eliminate this, the stud hole…